Login | Register
My pages Projects Community openCollabNet

Discussions > users > 64-bit and current

Project highlights: Stable Version: 1.6.1, Development Version: 1.7.6

current
Discussion topic

Hide all messages in topic

All messages in topic

Re: 64-bit and current

Reply

Author theslack
Full name Jack Neely
Date 2006-07-19 18:38:08 PDT
Message Well..."x86_64" should be the proper arch that your channels need to
be setup with to work with the client that has that platform file.

You may also want too turn up the logging and look in the current.log
file. Before it returns the fault about no compatible channels it
should list out the arch/rel of the client machine and any channel
tuples it found that match.

Jack

RE: 64-bit and current

Reply

Author Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Full name Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Date 2006-07-19 15:05:58 PDT
Message Sorry for the delay, below is the response

x86_64-redhat-linux

-----Original Message-----
From: Jack Neely [mailto:jjneely at gmail dot com]
Sent: Wednesday, July 19, 2006 8:38 AM
To: users at current dot tigris dot org
Subject: Re: 64-bit and current

What does "cat /etc/rpm/platform" say?

On 7/19/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> Still no love. I want to try a 32 bit machine, just in case I messed
> something else up.
>
> -----Original Message-----
> From: Jack Neely [mailto:jjneely at gmail dot com]
> Sent: Tuesday, July 18, 2006 9:19 PM
> To: users at current dot tigris dot org
> Subject: Re: 64-bit and current
>
> Try x86_64 as your arch.
>
> The contents of /etc/rpm/platform should be of the format
> <arch>-redhat-linux where "arch" is the arch that RPM believes your
> system to be.
>
> Also, I've returned from a bit of vacation so if any brave souls would
> like assistance getting 1.7.3 up and working to do some testing I'll
> be glad to help you out. (It is a little rough around the edges.)
>
> Jack
>
> On 7/18/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> > I am running into the same thing, I run cadmin create_channel --name
> "RHEL4
> > 64bit" --label RHEL4-64 --arch ia32e --release 4AS --description "RHEL
4AS
> > 64Bit" on the current server, on the client I get the 'No compatible
> > channels' error
> >
> > What am I missing?
> >
> > Thanks
> >
> > -----Original Message-----
> > From: Jack Neely [mailto:jjneely at gmail dot com]
> > Sent: Friday, May 19, 2006 9:45 AM
> > To: users at current dot tigris dot org
> > Subject: Re: 64-bit and current
> >
> > Arg,
> >
> > Try making the arch of your channel ia32e. Don't understand why its
> > that. Check our your systemid file and see what it has as your
> > architecture. Should be "x86_64-redhat-linux"
> >
> > Jack
> >
> > On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> > > I'm attempting to use current to patch 32-bit and 64-bit systems.
I've
> > > setup a 64-bit channel, and configured the client and server, which
all
> > > seems to work fine.
> > >
> > > However, I get a 'No compatible channels' error when I attempt to
update
> > > my client (which is also the server).
> > >
> > > Here's my uname -a output:
> > >
> > > Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006
x86_64
> > > x86_64 x86_64 GNU/Linux
> > >
> > > Here's my current.log output:
> > >
> > > May 19 14:26:42 arch: ia32e, rel: 4AS
> > > May 19 14:26:42 found: ()
> > > May 19 14:26:42 Fault! - no channels
> > > May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels
found
> > > for client'>
> > > May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> > > client'>
> > > May 19 14:26:42 sendClientResult() finished
> > >
> > > Any suggestions?
> > >
> > > Thanks,
> > >
> > > drew
> > > --
> > >
> > > To do just the opposite is also a form of imitation.
> > > - Georg Christoph Lichtenberg (1742 - 1799)
> > >
> > > --------------------​--------------------​--------------------​---------
> > > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > > For additional commands, e-mail: users-help at current dot tigris dot org
> > >
> > >
> >
> > --------------------​--------------------​--------------------​---------
> > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > For additional commands, e-mail: users-help at current dot tigris dot org
> >
> >
> >
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>
>

--------------------​--------------------​--------------------​---------
To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
For additional commands, e-mail: users-help at current dot tigris dot org
Attachments

Re: 64-bit and current

Reply

Author theslack
Full name Jack Neely
Date 2006-07-19 06:37:59 PDT
Message What does "cat /etc/rpm/platform" say?

On 7/19/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> Still no love. I want to try a 32 bit machine, just in case I messed
> something else up.
>
> -----Original Message-----
> From: Jack Neely [mailto:jjneely at gmail dot com]
> Sent: Tuesday, July 18, 2006 9:19 PM
> To: users at current dot tigris dot org
> Subject: Re: 64-bit and current
>
> Try x86_64 as your arch.
>
> The contents of /etc/rpm/platform should be of the format
> <arch>-redhat-linux where "arch" is the arch that RPM believes your
> system to be.
>
> Also, I've returned from a bit of vacation so if any brave souls would
> like assistance getting 1.7.3 up and working to do some testing I'll
> be glad to help you out. (It is a little rough around the edges.)
>
> Jack
>
> On 7/18/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> > I am running into the same thing, I run cadmin create_channel --name
> "RHEL4
> > 64bit" --label RHEL4-64 --arch ia32e --release 4AS --description "RHEL 4AS
> > 64Bit" on the current server, on the client I get the 'No compatible
> > channels' error
> >
> > What am I missing?
> >
> > Thanks
> >
> > -----Original Message-----
> > From: Jack Neely [mailto:jjneely at gmail dot com]
> > Sent: Friday, May 19, 2006 9:45 AM
> > To: users at current dot tigris dot org
> > Subject: Re: 64-bit and current
> >
> > Arg,
> >
> > Try making the arch of your channel ia32e. Don't understand why its
> > that. Check our your systemid file and see what it has as your
> > architecture. Should be "x86_64-redhat-linux"
> >
> > Jack
> >
> > On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> > > I'm attempting to use current to patch 32-bit and 64-bit systems. I've
> > > setup a 64-bit channel, and configured the client and server, which all
> > > seems to work fine.
> > >
> > > However, I get a 'No compatible channels' error when I attempt to update
> > > my client (which is also the server).
> > >
> > > Here's my uname -a output:
> > >
> > > Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
> > > x86_64 x86_64 GNU/Linux
> > >
> > > Here's my current.log output:
> > >
> > > May 19 14:26:42 arch: ia32e, rel: 4AS
> > > May 19 14:26:42 found: ()
> > > May 19 14:26:42 Fault! - no channels
> > > May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
> > > for client'>
> > > May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> > > client'>
> > > May 19 14:26:42 sendClientResult() finished
> > >
> > > Any suggestions?
> > >
> > > Thanks,
> > >
> > > drew
> > > --
> > >
> > > To do just the opposite is also a form of imitation.
> > > - Georg Christoph Lichtenberg (1742 - 1799)
> > >
> > > --------------------​--------------------​--------------------​---------
> > > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > > For additional commands, e-mail: users-help at current dot tigris dot org
> > >
> > >
> >
> > --------------------​--------------------​--------------------​---------
> > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > For additional commands, e-mail: users-help at current dot tigris dot org
> >
> >
> >
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>
>

RE: 64-bit and current

Reply

Author Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Full name Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Date 2006-07-19 03:20:01 PDT
Message Still no love. I want to try a 32 bit machine, just in case I messed
something else up.

-----Original Message-----
From: Jack Neely [mailto:jjneely at gmail dot com]
Sent: Tuesday, July 18, 2006 9:19 PM
To: users at current dot tigris dot org
Subject: Re: 64-bit and current

Try x86_64 as your arch.

The contents of /etc/rpm/platform should be of the format
<arch>-redhat-linux where "arch" is the arch that RPM believes your
system to be.

Also, I've returned from a bit of vacation so if any brave souls would
like assistance getting 1.7.3 up and working to do some testing I'll
be glad to help you out. (It is a little rough around the edges.)

Jack

On 7/18/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> I am running into the same thing, I run cadmin create_channel --name
"RHEL4
> 64bit" --label RHEL4-64 --arch ia32e --release 4AS --description "RHEL 4AS
> 64Bit" on the current server, on the client I get the 'No compatible
> channels' error
>
> What am I missing?
>
> Thanks
>
> -----Original Message-----
> From: Jack Neely [mailto:jjneely at gmail dot com]
> Sent: Friday, May 19, 2006 9:45 AM
> To: users at current dot tigris dot org
> Subject: Re: 64-bit and current
>
> Arg,
>
> Try making the arch of your channel ia32e. Don't understand why its
> that. Check our your systemid file and see what it has as your
> architecture. Should be "x86_64-redhat-linux"
>
> Jack
>
> On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> > I'm attempting to use current to patch 32-bit and 64-bit systems. I've
> > setup a 64-bit channel, and configured the client and server, which all
> > seems to work fine.
> >
> > However, I get a 'No compatible channels' error when I attempt to update
> > my client (which is also the server).
> >
> > Here's my uname -a output:
> >
> > Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
> > x86_64 x86_64 GNU/Linux
> >
> > Here's my current.log output:
> >
> > May 19 14:26:42 arch: ia32e, rel: 4AS
> > May 19 14:26:42 found: ()
> > May 19 14:26:42 Fault! - no channels
> > May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
> > for client'>
> > May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> > client'>
> > May 19 14:26:42 sendClientResult() finished
> >
> > Any suggestions?
> >
> > Thanks,
> >
> > drew
> > --
> >
> > To do just the opposite is also a form of imitation.
> > - Georg Christoph Lichtenberg (1742 - 1799)
> >
> > --------------------​--------------------​--------------------​---------
> > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > For additional commands, e-mail: users-help at current dot tigris dot org
> >
> >
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>
>

--------------------​--------------------​--------------------​---------
To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
For additional commands, e-mail: users-help at current dot tigris dot org
Attachments

Re: 64-bit and current

Reply

Author theslack
Full name Jack Neely
Date 2006-07-18 19:19:09 PDT
Message Try x86_64 as your arch.

The contents of /etc/rpm/platform should be of the format
<arch>-redhat-linux where "arch" is the arch that RPM believes your
system to be.

Also, I've returned from a bit of vacation so if any brave souls would
like assistance getting 1.7.3 up and working to do some testing I'll
be glad to help you out. (It is a little rough around the edges.)

Jack

On 7/18/06, Erik van Oudheusden <hohenfelsjoe at gmail dot com> wrote:
> I am running into the same thing, I run cadmin create_channel --name "RHEL4
> 64bit" --label RHEL4-64 --arch ia32e --release 4AS --description "RHEL 4AS
> 64Bit" on the current server, on the client I get the 'No compatible
> channels' error
>
> What am I missing?
>
> Thanks
>
> -----Original Message-----
> From: Jack Neely [mailto:jjneely at gmail dot com]
> Sent: Friday, May 19, 2006 9:45 AM
> To: users at current dot tigris dot org
> Subject: Re: 64-bit and current
>
> Arg,
>
> Try making the arch of your channel ia32e. Don't understand why its
> that. Check our your systemid file and see what it has as your
> architecture. Should be "x86_64-redhat-linux"
>
> Jack
>
> On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> > I'm attempting to use current to patch 32-bit and 64-bit systems. I've
> > setup a 64-bit channel, and configured the client and server, which all
> > seems to work fine.
> >
> > However, I get a 'No compatible channels' error when I attempt to update
> > my client (which is also the server).
> >
> > Here's my uname -a output:
> >
> > Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
> > x86_64 x86_64 GNU/Linux
> >
> > Here's my current.log output:
> >
> > May 19 14:26:42 arch: ia32e, rel: 4AS
> > May 19 14:26:42 found: ()
> > May 19 14:26:42 Fault! - no channels
> > May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
> > for client'>
> > May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> > client'>
> > May 19 14:26:42 sendClientResult() finished
> >
> > Any suggestions?
> >
> > Thanks,
> >
> > drew
> > --
> >
> > To do just the opposite is also a form of imitation.
> > - Georg Christoph Lichtenberg (1742 - 1799)
> >
> > --------------------​--------------------​--------------------​---------
> > To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> > For additional commands, e-mail: users-help at current dot tigris dot org
> >
> >
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>
>

RE: 64-bit and current

Reply

Author Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Full name Erik van Oudheusden <hohenfelsjoe at gmail dot com>
Date 2006-07-18 18:54:04 PDT
Message I am running into the same thing, I run cadmin create_channel --name "RHEL4
64bit" --label RHEL4-64 --arch ia32e --release 4AS --description "RHEL 4AS
64Bit" on the current server, on the client I get the 'No compatible
channels' error

What am I missing?

Thanks

-----Original Message-----
From: Jack Neely [mailto:jjneely at gmail dot com]
Sent: Friday, May 19, 2006 9:45 AM
To: users at current dot tigris dot org
Subject: Re: 64-bit and current

Arg,

Try making the arch of your channel ia32e. Don't understand why its
that. Check our your systemid file and see what it has as your
architecture. Should be "x86_64-redhat-linux"

Jack

On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> I'm attempting to use current to patch 32-bit and 64-bit systems. I've
> setup a 64-bit channel, and configured the client and server, which all
> seems to work fine.
>
> However, I get a 'No compatible channels' error when I attempt to update
> my client (which is also the server).
>
> Here's my uname -a output:
>
> Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
> x86_64 x86_64 GNU/Linux
>
> Here's my current.log output:
>
> May 19 14:26:42 arch: ia32e, rel: 4AS
> May 19 14:26:42 found: ()
> May 19 14:26:42 Fault! - no channels
> May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
> for client'>
> May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> client'>
> May 19 14:26:42 sendClientResult() finished
>
> Any suggestions?
>
> Thanks,
>
> drew
> --
>
> To do just the opposite is also a form of imitation.
> - Georg Christoph Lichtenberg (1742 - 1799)
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>

--------------------​--------------------​--------------------​---------
To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
For additional commands, e-mail: users-help at current dot tigris dot org
Attachments

Re: 64-bit and current

Reply

Author darwinscusp
Full name Drew Myers
Date 2006-05-19 10:41:26 PDT
Message [root@hostname scripts]# rpm -q --qf
"%{name}-%{version}-​%{release}:%{epoch}.​%{arch}\n" redhat-release
redhat-release-4AS-4​.1:(none).x86_64


drew
--

Honest differences are often a healthy sign of progress.
    - Mahatma Gandhi (1869 - 1948)

Re: 64-bit and current

Reply

Author theslack
Full name Jack Neely
Date 2006-05-19 10:32:30 PDT
Message The arch is gotten from RPM not from the uname. However, I do think
its really interesting why your arch is that.

Can you send me the output of :

   rpm -q --qf "%{name}-%{version}-​%{release}:%{epoch}.​%{arch}\n" redhat-release

/me hopes I typed that right.

Jack


On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> Thanks for the quick reply Jack.
>
> The systemid file reports ia32e, though uname -i reports x86_64. Not
> sure where that discrepancy is coming from.
>
> I modified my channel definition in the database to use ia32e, and
> everything's working cleanly now :).
>
> I'm curious about why the difference in systemid's notion of the
> architecture vs uname's though.
>
> Thanks again Jack!
>
>
> drew
> --
>
> Courage is resistance to fear, mastery of fear - not absence of fear.
> - Mark Twain
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>

Re: 64-bit and current

Reply

Author darwinscusp
Full name Drew Myers
Date 2006-05-19 07:56:46 PDT
Message Thanks for the quick reply Jack.

The systemid file reports ia32e, though uname -i reports x86_64. Not
sure where that discrepancy is coming from.

I modified my channel definition in the database to use ia32e, and
everything's working cleanly now :).

I'm curious about why the difference in systemid's notion of the
architecture vs uname's though.

Thanks again Jack!


drew
--

Courage is resistance to fear, mastery of fear - not absence of fear.
    - Mark Twain

Re: 64-bit and current

Reply

Author theslack
Full name Jack Neely
Date 2006-05-19 07:44:30 PDT
Message Arg,

Try making the arch of your channel ia32e. Don't understand why its
that. Check our your systemid file and see what it has as your
architecture. Should be "x86_64-redhat-linux"

Jack

On 5/19/06, Drew Myers <drew at sundawg dot org> wrote:
> I'm attempting to use current to patch 32-bit and 64-bit systems. I've
> setup a 64-bit channel, and configured the client and server, which all
> seems to work fine.
>
> However, I get a 'No compatible channels' error when I attempt to update
> my client (which is also the server).
>
> Here's my uname -a output:
>
> Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
> x86_64 x86_64 GNU/Linux
>
> Here's my current.log output:
>
> May 19 14:26:42 arch: ia32e, rel: 4AS
> May 19 14:26:42 found: ()
> May 19 14:26:42 Fault! - no channels
> May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
> for client'>
> May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
> client'>
> May 19 14:26:42 sendClientResult() finished
>
> Any suggestions?
>
> Thanks,
>
> drew
> --
>
> To do just the opposite is also a form of imitation.
> - Georg Christoph Lichtenberg (1742 - 1799)
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@cu​rrent.tigris.org
> For additional commands, e-mail: users-help at current dot tigris dot org
>
>

64-bit and current

Reply

Author darwinscusp
Full name Drew Myers
Date 2006-05-19 07:33:03 PDT
Message I'm attempting to use current to patch 32-bit and 64-bit systems. I've
setup a 64-bit channel, and configured the client and server, which all
seems to work fine.

However, I get a 'No compatible channels' error when I attempt to update
my client (which is also the server).

Here's my uname -a output:

Linux hostname 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:56:28 EST 2006 x86_64
x86_64 x86_64 GNU/Linux

Here's my current.log output:

May 19 14:26:42 arch: ia32e, rel: 4AS
May 19 14:26:42 found: ()
May 19 14:26:42 Fault! - no channels
May 19 14:26:42 API Result = <Fault 1000: 'No compatible channels found
for client'>
May 19 14:26:42 Fault: <Fault 1000: 'No compatible channels found for
client'>
May 19 14:26:42 sendClientResult() finished

Any suggestions?

Thanks,

drew
--

To do just the opposite is also a form of imitation.
    - Georg Christoph Lichtenberg (1742 - 1799)
Messages per page: