Hi Jack . Thanks for support . So far  I switched to Sqlite option and it worked . I'll inspect MYsql option  later  : 

 Now it looks like current server is running and ready for requests . I've managed to register RHEL ES 4.0 update2 client already . And I have to mention that registration requires  specific definition for the  client  :

  For  example  adding the channel in the way as below   is wrong -

  cadmin create_channel --name "RHEL ES 4.4" --label 4.4 --arch i386 --release 4.4 --description "RHEL 4 update4"

The correct  method is follow :

cadmin create_channel --name "RH4ES" --label RH4ES  --arch i386  --release 4ES --description "4ES running on i686-redhat-linux"

This data is taken from /etc/sysconfig/rhn/systemid file .

   But ... when I launched on the client side  up2date --install command I've got an error  :

up2date --update
There was a fatal error communicating with the server. The message was:
Not Found

 Please check /var/log/current.log file from this  up2date --install session .I used fake user for the registration .

Any ideas ?

   thanks . Vladimir .



  

-----Original Message-----
From: Jack Neely [
mailto:jjneely@gmail.com]
Sent: Tuesday, March 20, 2007 3:56 PM
To: users@current.tigris.org
Subject: Re: Re: Re: Re: current : cadmin create channel error

Is MySQL configured properly to allow the apache user to connect as bob@localhost?

Jack

On 3/20/07, Berezovski, Vladimir <Vberezovski@nds.com> wrote:
>
>
>
>    Ok , you were right with certificates - I've checked the md5 sums
> and they were different .Fixed .Thanks .
> Now situation has improved indeed although again I receive an error
> from the current when try to build a channel :
>
> The last line of cadmin create_channel output  is :
>
> OpenSSL.SSL.SysCallError: (104, 'Connection reset by peer')
>
> When I inspect the /var/log/current.log file I see the follow :
>
>
> Mar 20 10:26:18 Current v1.6.1 starting up Mar 20 10:26:18 Could not
> get DB connection!
> Mar 20 10:26:18 Error initializing data base!  Current will not
> function
>
> But MYSQL  daemon is running  , up2date database was created and bob
> user has been granted  permissions as in docs .
>  My /etc/current/current.conf  looks like :
>
> og_file = /var/log/current.log
> log_level = 4
> apache_config_file = /etc/httpd/conf.d/current.httpd.conf
> access_type = user
> access_arg = apache
> current_dir = /export/current/www
> # The 'db' is which backend we're using # db_type=pysqlite db_type =
> mysql # db_user and db_pass should be obvious db_user = bob db_pass =
> # db_name is the name of the database - what oracle calls a 'SID'
> db_name = up2date
> db_host = localhost
>  .........
>
>   By the way what permissions are to be set for all current critical files ?
> I noticed that even log file has to be configured in special way .
>
>     Thanks again . Vladimir .
>
> -----Original Message-----
> From: Jack Neely [
mailto:jjneely@gmail.com]
> Sent: Monday, March 19, 2007 4:09 PM
> To: users@current.tigris.org
> Subject: Re: Re: Re: current : cadmin create channel error
>
> That only works in 1.7.x...
>
> The problem here is that 1.6 uses thel up2date python code directly to
> do cadmin's cummunication to the Current server.  Vladimir, looks like
> the CA cert that your up2date configuration points to is not the CA
> cert on your apache server.  There are docs for creating the SSL
> certifcates on the website.
>
> Jack
>
> On 3/19/07, Jared Greenwald <greenwaldjared@gmail.com> wrote:
> > try something like this:
> >
> > cadmin -s
http://localhost.XMLRPC create_channel ...
> >
> >
> > -Jared
> >
> > On 3/19/07, Berezovski, Vladimir <Vberezovski@nds.com> wrote:
> > >
> > >
> > > Neither  cadmin nor  up2date commands do not understand -s option .
> > > up2date config file is done as required .
> > >
> > > cadmin    create_channel  -s  --name "RHEL ES 4.4" --label 4.4 --arch
> i386
> > --release 4.4 --description "RHEL 4 update4"
> > > usage: cadmin [options]
> > >
> > > cadmin: error: no such option: -s
> > >
> > >   Thanks . Vlad .
> > >
> > > ________________________________
> >  From: Jared Greenwald [
mailto:greenwaldjared@gmail.com]
> > > Sent: Monday, March 19, 2007 3:17 PM
> > > To: users@current.tigris.org
> > > Subject: Re: Re: current : cadmin create channel error
> > >
> > >
> > >
> > > Anywhere on the command-line.  I usually specify it first.  The
> > > python
> > command-line option processing is extremely flexible.
> > >
> > > Also, I forgot to mention, the server address should include the
> > > path to
> > the XMLRPC, something like "
http://localhost/XMLRPC".
> > >
> > > Hope that helps...
> > >
> > > -Jared
> > >
> > >
> > > On 3/19/07, Berezovski, Vladimir < Vberezovski@nds.com> wrote:
> > > >
> > > >
> > > > Thanks for response .
> > > > Sorry ,  where it is to be specified  ?
> > > >
> > > > ________________________________
> >  From: Jared Greenwald [
mailto:greenwaldjared@gmail.com]
> > > > Sent: Monday, March 19, 2007 3:08 PM
> > > > To: users@current.tigris.org
> > > > Subject: Re: current : cadmin create channel error
> > > >
> > > >
> > > >
> > > > You must specify a server with either "-s" or "--server".
> > > >
> > > > -Jared
> > > >
> > > >
> > > > On 3/19/07, Berezovski, Vladimir < Vberezovski@nds.com> wrote:
> > > > >
> > > > >
> > > > >   Hi , I've been trying to launch Current 1.6 on RHEL ES 4
> > > > > update 4
> > .After I configured current.conf ,mysql , current.httpd.conf , ssl
> > certificates files and copied them to their places I get an error
> > when run cadmin create_channel step :
> > > > >
> > > > > [root@current4 ~]# cadmin create_channel   --name "RHEL ES 4.4"
> > --label 4.4 --arch i386 --release 4.4 --description "RHEL 4 update4"
> > > > > Traceback (most recent call last):
> > > > >   File "/usr/sbin/cadmin", line 131, in ?
> > > > >     main()
> > > > > .
> > > > >  (here are numbers  of  output lines ).
> > > > > .
> > > > > .
> > > > >     sent = self._connection.send(data)
> > > > > OpenSSL.SSL.Error: [('SSL routines',
> > > > > 'SSL3_GET_SERVER_CERTIFICATE',
> > 'certificate verify failed')]
> > > > >
> > > > > Also when I try to register the server  against itself there
> > > > > is as
> > error on SSL as well :
> > > > >
> > > > > strace -o /tmp/log1 up2date --register --nox There was an SSL
> > > > > error: [('SSL routines',
> > 'SSL3_GET_SERVER_CERTIFICATE', 'certificate verify failed')]
> > > > > A common cause of this error is the system time being incorrect.
> > Verify that the time on this system is correct.
> > > > >
> > > > >  Although ntpd is running .
> > > > >  File /etc/sysconfig/rhn/up2date point to the current server
> > > > > in FQDN
> > way .
> > > > >  Ports 80 and 443 are open .
> > > > >
> > > > >  Also I verified the certificate with : openssl s_client
> > > > > -connect
> > current4:443 -CAfile /usr/share/rhn/RHNS-CA-CERT command and got :
> > > > >
> > > > >  Verify return code: 18 (self signed certificate) output .
> > > > >
> > > > > What  can go wrong here ? Thank you for assistance .
> > > > >
> > > > > Yours ,
> > > > >     Vladimir Berezovski
> >
> .*********************************************************************
> > **************
> > > > > This email message and any attachments thereto are intended
> > > > > only for
> > use by the addressee(s) named above, and may contain legally
> > privileged and/or confidential information. If the reader of this
> > message is not the intended recipient, or the employee or agent
> > responsible to deliver it to the intended recipient, you are hereby
> > notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited. If you have received this
> > communication in error, please immediately notify the
> > postmaster@nds.com
> and destroy the original message.
> > > > >
> >
> **********************************************************************
> > *************
> > > > >
> >
> ---------------------------------------------------------------------
> > > > > To unsubscribe, e-mail:
> > users-unsubscribe@current.tigris.org
> > > > > For additional commands, e-mail: users-help@current.tigris.org
> > > > >
> > > > >
> > > >
> > > >
> >
> **********************************************************************
> > *************
> > > > This email message and any attachments thereto are intended only
> > > > for use
> > by the addressee(s) named above, and may contain legally privileged
> > and/or confidential information. If the reader of this message is
> > not the intended recipient, or the employee or agent responsible to
> > deliver it to the intended recipient, you are hereby notified that
> > any dissemination, distribution or copying of this communication is
> > strictly prohibited. If you have received this communication in
> > error, please immediately notify the postmaster@nds.com and destroy
> > the original
> message.
> > > >
> >
> **********************************************************************
> > *************
> > >
> > >
> >
> **********************************************************************
> > *************
> > > This email message and any attachments thereto are intended only
> > > for use
> > by the addressee(s) named above, and may contain legally privileged
> > and/or confidential information. If the reader of this message is
> > not the intended recipient, or the employee or agent responsible to
> > deliver it to the intended recipient, you are hereby notified that
> > any dissemination, distribution or copying of this communication is
> > strictly prohibited. If you have received this communication in
> > error, please immediately notify the postmaster@nds.com and destroy
> > the original
> message.
> > >
> >
> **********************************************************************
> > *************
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> users-unsubscribe@current.tigris.org
> For additional commands, e-mail: users-help@current.tigris.org
>
>
>
> **********************************************************************
> ************* This email message and any attachments thereto are
> intended only for use by the addressee(s) named above, and may contain
> legally privileged and/or confidential information. If the reader of
> this message is not the intended recipient, or the employee or agent
> responsible to deliver it to the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this
> communication is strictly prohibited. If you have received this
> communication in error, please immediately notify the
> postmaster@nds.com and destroy the original message.
> **********************************************************************
> *************

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@current.tigris.org
For additional commands, e-mail: users-help@current.tigris.org

***********************************************************************************
This email message and any attachments thereto are intended only for use by the addressee(s) named above, and may contain legally privileged and/or confidential information. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the postmaster@nds.com and destroy the original message.
***********************************************************************************